홈으로이동
Products
Flux for non-ferrous metals
Introducing flux products

Flux for non-ferrous metals

Introducing flux products

Introducing DS Liquid’s products

1.Flux for general purpose

Category Purpose of Use Product Name Na Contents Form Recommended Temp(℃)
Dross separation
(Exothermic reaction)
  • This product effectively separates and recovers metal Al from dross.
  • It can prevent oxidation loss of molten aluminum.
  • Each product is specifically designed and customized for the clients.
 A-111 Na-based Powder 700~750
C-111 650-720
WDR(#1) 680~750
WDR(#2) 650~720
K-104YG
K-104DM
K-104DL		 710 or above 
Inclusions remover
  • This product removes oxides from molten metals.
  • It can increase the recovery ratio and improve the Al ingot surface.
 A-800M Na-based Powder 720 or above
H2 gas remover
  • This product removes H2 gas in molten metals.
  • This product can prevent pin holes/porosities from forming in the final product.
 DGF-200YG
DGF-200H
DGF-500N		 Na-based Powder 710 or above

2.Non-toxic flux for general purposes

Category Purpose of Use Product Name Na Contents Form Recommended Temp(℃)
Dross separation
(Exothermic reaction)
  • This product effectively separates and recovers metal Al from dross.
  • It can prevent oxidation loss of molten aluminum.
  • Each product is specifically designed and customized for the clients.
 A-111(#2) Na-based Powder 710 or above
C-111(#1,2) 670 or above
WDR(#3,4) 680 or above
K-104YG(#1)
K-104SK1,2
K-104DL(#2)		 710 or above
Inclusions remover
  • This product removes oxides from molten metals.
  • It can increase the recovery ratio and improve the Al ingot surface.
 A-800M(#1,2) Na-based Powder 720 or above
H2 gas remover 
  • This product removes H2 gas in molten metals.
  • This product can prevent pin holes/porosities from forming in the final product.
 A-100NF Non Na-based Powder 710 or above
DGF-100SK Na-based 680 or above
DGF-300LM
DGF-400PJ		 710 or above
ENF-50N-2 Na-based Powder 710 or above
AS-10 Na-based Tablet 710 or above
D-109 Na-based Tablet 680~730
FI-100 Non Na-based Tablet 680~720

3. Flux for special purposes

Category Purpose of Use Product Name Na Contents Form Recommended Temp(℃)
Mg reducer
  • This product reduces Mg contents.
  • It is possible to accurately calculate the reducing ratio of Mg.
  • Reducing magnesium is possible regardless of the level of Mg content.
 MRF-100DN
MRF-300PS		 Na-based Powder 730 or above
MRF-70HY Na-based Powder 700 or above
MRF-85(#1) Non Na-based Powder 700 or above
Alkaline metal reducer
(Ca, Na)　
  • This product reduces calcium or sodium.
  • It is possible to accurately calculate the reducing ratio of Ca(Na).
  • An additional effect is that impurities and inclusions are removed from the molten metal.
 CRF-100
CRF-100F		 Non Na-based Powder 680 or above
URF-100TY Na-based Powder 700 or above
Covering refractory for molten metals such as cast iron and cast steel, and aluminum
  • This product works as a refractory for Al.
  • It prevents impurities from being absorbed into the Al and reserves heat.
  • It also improves the cast surface quality.
 LW-150 Non Na-based Liquid -
Lubricant for casting
(de-moulding)
  • This product can improve the quality of the surfaces on slabs and billets.
 ALT-100 Liquid -
Improving aluminum structure Refining of crystal grains
(α crystal)
  • This product prevents the grouping of α crystal during solidification.
 NK-113-2 Non Na-based Tablet 690~740
Refining of Si grains
(eutectic or hypo-eutectic)
  • This product refines the deposited Si with Na.
 		 NS-111 Na-based Powder 690~750
NS-222 720~750
NS(#7) 800 or above
Refining of primary Si
(hyper-eutectic)
  • This product prevents the grouping of Si in hyper-eutectic alloys with high Si content.
 FP-113-P Non Na-based Powder 760~800
FP-113-T Tablet
Oxidation prevention
  • This product prevents oxidation loss of molten aluminum and increases the recovery ratio.
 RC-100 Na-based Powder 710 or above

4.Flux for other non-ferrous metals

Category Purpose of Use Product Name Na Contents Form Recommended Temp(℃)
Cu(Copper) Removing oxides This product removes oxides and recovers molten metal from the dross, which increases product quality and recovery ratio.  B-100(#1,2) Na-based Powder 1,200 or above
Removing gas This product removes O2 gas from molten Cu. BP-BLOCK Tablet 1,200 or above
Lubricant for continuous casting This product prevents combustion between the mould and molten copper, and makes casting easier. (Low viscosity and melting point)  CC-10-Y Powder 1,200 or above
CC-20D(#1) Non Na-based Powder 1,200 or above
Zn (Zinc) This product removes oxides and recovers molten metal from the dross, which increases product quality and recovery ratio.  Z-21-38 Na-based Powder 420~450